Hammer Strength MTS Iso-Lateral Kneeling Leg Curl Parts & Diagram

Diagram pages

• MTSKC KNEELING LEG PRESS COMPONENT ASSEMBLY
• MTSKC KNEELING LEG PRESS COMPONENT ASSEMBLY (Continued)
• MTSKC KNEELING LEG PRESS RIGHT SIDE FRAME ASSEMBLY
• MTSKC KNEELING LEG PRESS RIGHT WORK ARM ASSEMBLY
• MTSKC KNEELING LEG PRESS BACK FRAME ASSEMBLY
• MTSKC KNEELING LEG PRESS KNEE FRAME ASSEMBLY
• MTSKC KNEELING LEG PRESS LEFT SIDE FRAME ASSEMBLY
• MTSKC KNEELING LEG PRESS LEFT WORK ARM ASSEMBLY
• MTSKC KNEELING LEG PRESS 150 LBS. WEIGHT STACK ASSEMBLY

Parts in this machine

All 84 parts in this machine. Start a free PlateLog trial to see real part numbers and ordering links.

• Bottom Frame Weldment
• ASSY, MTKC, LEFT SIDE
• ASSY, MTKC, RIGHT SIDE
• Back Frame Assembly
• Hammer Head Washer
• Hex Head Bolt
• Flat Washer 1/2"
• Nylock Nut 1/2-13
• Hex Bolt (1/2-13 x 2.50)
• Nylock Jam Nut 1/2-13
• Knee Frame Assembly
• Elbow Pad (24 x 11)
• Small Pad (7 x 11-1/4)
• Flange Rubber Slipper (3x6)
• Short Roller Pad Assembly
• Bearing Housing Cap
• Pad (8 x 6)
• SAE Washer 3/8" SS
• Hex Screw (M10 x 1.5 x 35mm)
• M10 x 1.5 x 65mm Screw
• Axis of Rotation Label
• Elbow Pad Wear Cover
• Right Arm Assembly
• Left Arm Assembly
• Right Side Frame Weldment
• Weight Stack Cushion
• 3-inch Belt Pulley
• 2-Hole Flange Bearing (1" ID)
• Rectangular End Cap (1.5 x 3 inch)
• Carriage Bumper
• Hex Bolt (1/2-13 x 3.75)
• Hex Head Bolt (1/2-13 x 3.25)
• Plain Washer Type A
• Hex Bolt (1/2-13 x 1.50)
• Nylock Nut (1/4-20)
• Hex Bolt (1/4-20 x 2.50)
• 150 LB Weight Stack Assembly
• Guide Rod (.75 OD x 45.25)
• Round End Cap (0.75 x 0.5 inch)
• Shaft Collar (3/4 ID)
• Increment Weight Assembly
• Left Belt Attach Weldment
• Belt Clamp Plate
• Flat Washer (0.391 ID)
• Hex Head Bolt (3/8-16 x 1.25)
• Belt Wrap Shaft (3/8" SS)
• Spool Belt (90 Inches)
• Side Shroud (44.63")
• Plastic Side Panel (44.63")
• Nylon Rivet
• MTS Hole Cover Label
• Name Plate
• ASTM Warning Label
• Warning Triangle Label
• Right Increment Weight Decal
• Nylock Nut 3/8-16
• Accordion Sleeve
• Accordion Sleeve (1.0 ID x 1)
• Right Arm Weldment
• MTS Belt Cam Attach Plate
• Hex Head Bolt (3/8-16 x 16)
• Aluminum Shaft Collar (1.5 inch ID)
• Spider Nut (M10 x 1.5)
• Spacer Plate
• Back Frame Weldment
• HSLLP Grip (3.6875")
• Grip End Cap
• Rectangular End Cap (1.5x2)
• M4 x .7 Hex Socket Set Screw
• 7/16" Hole Plug
• Hammer Patent Decal
• Knee Frame Weldment
• Left Side Frame Weldment
• Belt Attach Weldment
• Left Arm Weldment
• 10lb Weight Plate
• 15-Hole Bayonet
• Spring Pin Bushing
• Lanyard Attachment Plug
• Selector Pin Assembly
• Weight Stack Head Plate
• Headplate Bushing
• Cable Crimp
• Increment Weight Bumper