Hammer Strength Linear Leg Press Parts & Diagram
Hammer Strength · Strength · Model HSLLP
The Hammer Strength Linear Leg Press is a plate-loaded lower body machine with a linear bearing carriage riding on guide rods, pressed from a reclined seat position. Its simple mechanical design with no cables or pulleys makes it a staple in strength-focused facilities and a reliable performer under heavy commercial use.
Diagram pages
- COMPONENT ASSEMBLY
- UPHOLSTERY PADS
- PAINTED FRAME WELDMENTS
- WEIGHT HORN ASSEMBLY
- FLOOR KIT CONTENTS
Parts in this machine
All 78 parts in this machine. Start a free PlateLog trial to see real part numbers and ordering links.
- Plain Washer Type A
- Shaft Collar (3/4 ID)
- Bronze Bushing (1.00" ID)
- Internal Retaining Ring
- HSLLP Grip (3.6875")
- M10 x 25mm Screw
- M10 x 1.5 x 30mm Screw
- Hex Screw (M10 x 1.5 x 35mm)
- Hex Bolt (M10 x 1.5 x 110mm)
- SAE Washer 3/8" SS
- Nylock Nut (M6)
- Nylock Nut (M12)
- Jam Nut (M10 x 1.5)
- Hole Plug
- Hex Bolt (M12 x 1.75 x 45mm)
- Hex Bolt (M12 x 1.75 x 80mm)
- Hex Bolt (M12 x 1.75 x 90mm)
- Hex Bolt (M12 x 1.75 x 100mm)
- Hex Bolt (M12 x 1.75 x 110mm)
- Hex Bolt (M12 x 1.75 x 120mm)
- Flat Washer (12mm SS)
- M6 x 75mm Screw
- 6mm Flat Washer
- Carriage Bumper
- 2x3 Frame End Cap
- 2x4 End Cap
- Front Seat Track
- Flange Rubber Slipper (3x6)
- ASTM Warning Label
- 1.020 ID Shaft Collar
- Serial Number Label
- Grip Ring (1.25 OD)
- Grip End Cap
- MM5 Ring
- 1-inch Strip Bumper
- Weight Horn Assembly
- Warning Triangle Label
- Seat Adjustment Shaft
- 1.25 Linear Ball Bearing
- HSLLP Line-X Board
- HSLLP Stop Plate
- HSLLP Carriage Bumper
- HSLLP Rackout Bumper
- 1.25 Case Hardened Guide Rod
- HSLLP Weight Rod Tube
- Backing Washer
- Large Plate Guard
- Name Plate
- Hammer Patent Decal
- Rubber End Cap
- Back Pad (15 x 11-1/4)
- Seat Pad (17 x 18-5/8)
- Instructional Placard
- Exercise Instruction Label
- Lock Warning Label
- E-Stop Label
- Seat Adjust Handle Weldment
- Seat Adjust Plate
- Seat Adjust Link Weldment
- Main Frame Weldment
- Housing Weldment
- Right Handle Weldment
- Left Handle Weldment
- Stop Weldment
- Seat Frame Weldment
- Seatback Weldment
- Carriage Weldment
- Support Weldment
- HSLLP Weldment
- Right Rackout Weldment
- Left Rackout Weldment
- Outer Plate
- Inner Plate
- Weight Horn
- Weight Horn End Cap
- Tapped Floor Plate
- M12 x 50mm Screw
- M12 x 35mm Screw
Start a free 14-day trial to unlock the interactive diagrams with real part numbers.
