Life Fitness Atmos Recumbent Bike Parts & Diagram
Life Fitness · Bike · Model MRR-CGC Series
Commercial recumbent exercise bike from Life Fitness's Atmos cardio line. Its step-through frame and supportive contoured seat make it a low-impact option well suited to deconditioned, rehab, and senior exercisers.
Parts in this machine
All 122 parts in this machine. Start a free PlateLog trial to see real part numbers and ordering links.
- RCB McFly PCB Assembly
- Pan Head Screw (M3.5 x 19)
- Pan Head Screw (M4 x 16)
- Aluminum Spacer (M5.3 x 8 x 7)
- Screw Grommet (#6)
- 6V 4AH Battery
- Double-Sided Adhesive Tape
- Cable Tie, 12 Inch
- RJ45 Receptacle
- Coax Plug
- Pan Head Screw (M4.2 x 19)
- I/O Panel Sheet Metal
- Plastic Grommet (#6 or #8)
- Power Cable, RCB to Panel
- I/O Adaptor Plate
- RG6 Coax Cable Assembly
- CAT5E Communication Cable
- Coaxial Panel Mount Connector
- Shielded RJ45 Coupler
- Right Crank Arm
- Crank Arm Plastic Cap
- Hex Washer Head Screw (8-18)
- Left Crank Arm
- Right Pedal Assembly
- Right Pedal Strap
- Left Pedal Assembly
- Left Pedal Strap
- Poly-V Drive Belt (8 Rib)
- Low Profile Nut (M19)
- Flat Washer (23x54x3mm)
- Flywheel
- Crankshaft
- Crank Key
- Ball Bearing (M25x52x15)
- Tolerance Ring (M52x15)
- Shaft Collar (M25)
- Set Screw (M6x1x8)
- Crankshaft Bearing Replacement Kit
- Idler Post Assembly
- Hex Bolt (M8x45)
- Flat Washer (M8.4)
- Retaining Ring (M19.84)
- Flat Washer (M20x31.75x0.79)
- Clutch/Sheave Assembly
- Hex Head Screw (M8 x 60mm)
- Jam Nut (M8)
- First Stage Tensioner Bracket
- Brake Generator with 20mm Extension
- Flange Head Screw (M5 x 12mm)
- Hex Washer Head Screw (M8 x 20mm)
- Recumbent Frame Weldment
- Floor Roller Wheel
- Retainer Ring
- Threaded Insert (M4 x 12mm)
- Life Fitness Script Logo, 10 Inch
- Threaded Insert, M8 x 1.25
- Threaded Insert, M6
- Handlebar Assembly with Grips
- Washer (8mm ID)
- Seat Grip Rubber
- Phillips Head Screw, 5mm x 8mm
- Cup Holder
- M8 Torx Button Head Screw
- Morpheus Recumbent Bike Hardware Kit
- Hex Socket Truss Head Screw, M8x35
- 1" Rubber Bumper
- Tube Spacer
- Flat Washer (.84" ID)
- Flat Washer (M6 x 16)
- Pan Head Screw (M6 x 55mm)
- Socket Head Screw (M6 x 16mm)
- Phillips Screw (5mm x 12mm)
- 10 x 6 Hex Washer Head Screw
- M9.55 x 16.5 Spring Fastener Clip
- Ferrite Suppression Core-Case
- M5 Phillips Pan Head Screw
- SE4 Monocolumn Weldment
- Console Mast Cover
- RS1 Seat Frame Assembly
- Hex Bolt (M10 x 160mm)
- M10 Serrated Flange Nut
- Flat Washer
- Spacer
- Rolling Wheel
- Seat Carriage Spacer
- Preload Roller Assembly
- Spring Washer (1.0)
- M10 Chuck Nut
- End Cap
- Seat Extrusion with Decal
- Seat Position Decal
- M8x20 Hex Socket Truss Head Screw
- Seat Stop
- Seat Adjustment Screw
- Front Seat Bumper
- Seat Extrusion End Cap (SDW)
- Seat Locking Plunger Assembly (Charcoal Grey)
- Seat Back Pad
- Spring Washer
- Bottom Seat Pad
- Upper Console Back Shroud
- Life Fitness Script Logo (5.25 inch)
- Lower Console Back Shroud
- Right Front Recumbent Shroud
- Left Front Recumbent Shroud
- Damper
- Front Stabilizer Assembly with Inserts
- Stabilizer Endcap
- Leg Leveler
- Rear Stabilizer Assembly with Inserts
- Domestic Power Cord (US)
- UK Power Cord
- Argentina Power Cord
- Australia Power Cord
- Brazil Power Cord
- Continental Europe Power Cord
- Console Power Cable
- Console to Base Signal Cable
- Battery Cable Assembly
- Motor Ground Cable
- 24VDC Power Supply
- Ferrite Bead
Start a free 14-day trial to unlock the interactive diagrams with real part numbers.
